THE CDIO SYLLABUS 3.0 - AN UPDATED STATEMENT OF GOALS

THE CDIO SYLLABUS 3.0 - AN UPDATED STATEMENT OF GOALS

J. Malmqvist, U. Lundqvist, A. Rosén, K. Edström, R. Gupta, H. Leong, et al, et al, et al, et al, et al, et al, et al, et al (2022).  THE CDIO SYLLABUS 3.0 - AN UPDATED STATEMENT OF GOALS. 18-36.

The CDIO Initiative is going through a process of reconsidering and updating the CDIO approach for engineering education development. Previous work resulted in substantial updates of the twelve CDIO standards and the introduction of “optional” CDIO standards. This paper reports on a similar review and update of the CDIO Syllabus to version 3.0. It has been developed by a working group consisting of four sub-groups and iterated and refined guided by feedback from the whole CDIO community. There are mainly three external drivers that motivate the changes: sustainability, digitalization, and acceleration. There is also an internal driver in the form of lessons learned within the CDIO community, from using the Syllabus in curriculum and course development. Approximately 70 updates are proposed, amongst them three additions on the X.X level, namely 1.4 Knowledge of Social Sciences and Humanities, 3.1 Teamwork and Collaboration, and 5.3 Research.

Authors (New): 
Johan Malmqvist
Ulrika Lundqvist
Anders Rosén
Kristina Edström
Rajnish Gupta
Helene Leong
Sin-Moh CHEAH
Jens Bennedsen
Ron Hugo
Aldert Kamp
Ola Leifler
Svante Gunnarsson
Janne Roslöf
Daniel Spooner
Pages: 
18-36
Affiliations: 
Chalmers University of Technology, Sweden
KTH Royal Institute of Technology,Sweden
Singapore Polytechnic, Singapore
Aarhus University, Denmark
University of Calgary, Canada
Aldert Kamp Advies, The Netherlands
Linköping University, Linköping, Sweden
University of Jyväskylä
Turku University of Applied Sciences, Turku, Finland
Polytechnique Montréal, Canada
Keywords: 
Sustainability
Digitalization
Acceleration
CDIO Standard 1
CDIO Standard 2
CDIO Standard 3
CDIO standard 4
CDIO Syllabus
CDIO Standard 5
CDIO Standard 6
CDIO Standard 7
CDIO Standard 8
CDIO Standard 9
CDIO Standard 10
CDIO Standard 11
CDIO Standard 12
Year: 
2022
Reference: 
ABET (n.a.). Rationale for Revising Criteria 3 and 5 - Why are We Looking at Criterion 3? Available at https://www.abet.org/accreditation/accreditation-criteria/accreditation-changes/rationale-for-revisingcriteria- 3/ (accessed 12 April 2022).: 
Adriole, S.J. (2018). Skills and Competencies for Digital Transformation. IT Professional, 20(6), pp 78- 81.: 
Barcelona Declaration. (2004). Conference of Engineering Education for Sustainable Development.: 
Becker, C., Chitchyan, R., Duboc, L., Easterbrook, S., Penzenstadler, B., Seyff, N., & Venters, C. C. (2015). Sustainability design and software: the Karlskrona manifesto. In IEEE International Conference on Software Engineering (ICSE), 2, pp. 467–476. IEEE.: 
Boon, M., & Van Baalen, S. (2019). Epistemology for interdisciplinary research – shifting philosophical paradigms of science. European Journal of Philosophy of Science, 9 (16).: 
CDIO (2004). The CDIO Standards. The CDIO Initiative, 12 April 2004. Available at www.cdio.org/files/standards/cdio_standards_1.0.pdf (accessed on 11 April 2022).: 
Choi, B. C. K., & Pak, A. W. P. (2006). Multidisciplinarity, interdisciplinarity and transdisciplinarity in health research, services, education and policy: 1. Definitions, objectives, and evidence of effectiveness, Clin Invest Med, 29 (6). pp 351–364.: 
Chuchalin, A. (2020). Evolution of the CDIO approach: BEng, MSc, and PhD level. European Journal of Engineering Education, 45(1), pp. 103-112.: 
Coffield. (2012). Learning Styles: Unreliable, Invalid and Impractical and yet still widely used. In Adey & Dillon (Eds.) Bad education: debunking myths in education. Maidenhead: Open University Press.: 
Crawley, E. F. (2001). The CDIO Syllabus – A Statement of Goals for Undergraduate Engineering Education. Department of Aeronautics and Astronautics, Massachusetts Institute of Technology.: 
Crawley, E. F., Malmqvist, J., Östlund, S., & Brodeur, D. (2007). Rethinking Engineering Education – The CDIO Approach, 1st ed., Springer-Verlag, New York, USA.: 
Crawley, E. F., Malmqvist, J., Östlund, S., Brodeur, D., & Edström, K. (2014). Rethinking Engineering Education – The CDIO Approach, 2nd ed., Springer-Verlag, New York, USA.: 
Crawley, E. F., Malmqvist, J., Lucas, W. A., & Brodeur, D. R. (2011). The CDIO Syllabus v2.0 – An Updated Statement of Goals for Engineering Education. Proceedings of the 7th International CDIO Conference, Technical University of Denmark, Copenhagen .: 
Cruz, M.L., Saunders-Smits, G.N., & Groen, P. (2020). Evaluation of Competency Methods in Engineering Education: A Systematic Review. European Journal of Engineering Education, 45(6), pp 729-757.: 
De Fouw, N., Klaassen, R. & Van Der Tang, Y. (2020). Prerequisites for Interdisciplinary Learning: Organisation and Staff. Proceedings of the 16th International CDIO Conference, pp. 665-675, Chalmers University of Technology, Gothenburg, Sweden.: 
Delors, J., et al. (1996). Learning – the Treasure Within: Report to UNESCO of the International Commission on Education for the Twenty-First Century, UNESCO Publishing, Paris, France.: 
Edström, K., Malmqvist, J., & Roslöf, J. (2020). Scholarly Development of Engineering Education – The CDIO approach. Special Issue. European Journal of Engineering Education, 45(1), 1-3.: 
ENAEE. (2021). The EUR-ACE® Framework Standards and Guidelines. https://www.enaee.eu/wpcontent/ uploads/2022/03/EAFSG-04112021-English-1-1.pdf. Accessed on April 13, 2022.: 
Enelund, M., & Henricson Briggs, K. (2020). Tracks for Change, Flexibility, Interdisciplinarity and Creativity in Engineering Education. Proceedings of the 16th International CDIO Conference, pp. 37- 47, Chalmers University of Technology, Gothenburg, Sweden.: 
Enelund, M., Knutson Wedel, M., Lundqvist, U., & Malmqvist, J. (2013). Integration of Education for Sustainable Development in the Mechanical Engineering Curriculum. Australasian Journal of Engineering Education, 19(1), 1-12.: 
EOP. (2020). The Engineering for One Planet Framework: Essential Learning Outcomes for Engineering Education.: 
EU. (2018). Amended Waste Framework Directive (EU) 2018/851.: 
Gunnarsson, S., Herbertsson, H., & Örman, H. (2019). Using Course and Program Matrices as Components in a Quality Assurance System. Proceedings of the 15th International CDIO Conference, Aarhus University, pp 110-119. Aarhus, Denmark.: 
Gurcan, F. (2019). Extraction of Core Competencies for Big Data: Implications for Competency-Based Engineering Education. International Journal of Engineering Education, 35(4), pp. 1110–1115.: 
Ha, B. D,, Trung, T. V., & Bao, N. L. E. (2019). A Proposed Closed-Loop CDIO Model to Improve the Startup Ability. Proceedings of the 15th International CDIO Conference, pp. 558-568, Aarhus University, Aarhus, Denmark.: 
IPCC (2018). Global warming of 1.5°C. An IPCC Special Report on the impacts of global warming of 1.5°C above pre-industrial levels and related global greenhouse gas emission pathways, in the context of strengthening the global response to the threat of climate change, sustainable development, and efforts to eradicate poverty. Masson-Delmotte, V., P. Zhai, H.-O. Pörtner, D. Roberts, J. Skea, P.R. Shukla, A. Pirani, W. Moufouma-Okia, C. Péan, R. Pidcock, S. Connors, J.B.R. Matthews, Y. Chen, X. Zhou, M.I. Gomis, E. Lonnoy, T. Maycock, M. Tignor, and T. Waterfield (eds.).: 
Junaid, S., Gorman, P. C., & Leslie, L. J. (2018). Developing Logbook Keeping as a Professional Skill through CDIO Projects. Proceedings of the 14th International CDIO Conference, Kanazawa Institute of Technology, Kanazawa, Japan.: 
Kamp, A. (2019). Science & Technology Education for 21st Century Europe. Discussion paper dated 18th December 2019. Task Force CESAER, Leuven.: 
10.5281/zenodo.3582544
Kamp, A. (2020). Navigating the Landscape of Higher Engineering Education – Coping with Decades of Accelerating Change Ahead.: 
Kjellgren, B., Keller, E. & Takau-Drobin, Y. (2018). Add-on Certificate in Global Competence: A Pragmatic Answer to a Challenging Question. Proceedings of the 14th International CDIO Conference, pp. 748-762, Kanazawa Institute of Technology, Kanazawa, Japan.: 
Klaassen, R., De Bruin, B., De Fouw, N., Kamp, A. & Hellendoorn, H. (2020). Cognitive, Social and Emotional Aspects of Interdisciplinary Learning. Proceedings of the 16th International CDIO Conference, pp. 701-713, Chalmers University of Technology, Gothenburg, Sweden.: 
Knutson Wedel, M., Malmqvist, J., Arehag, M., & Svanström, M. (2008). Implementing Engineering Education for Environmental Sustainability into CDIO Programs. Proceedings of the 4th International CDIO Conference, Gent, Belgium.: 
van Laar, E., van Deursen, A.J.A.M., van Dijk, J.A.G.M., & de Haan, J. (2017). The Relation between 21st Century Skills and Digital Skills: A Systematic Literacy Review; Computers in Human Behavior, 72, pp. 577-588.: 
Linköping University. (2019). The LiTH Syllabus.: 
Lozano, R., Merrill, M.Y., Sammalisto, K., Ceulemans, K., & Lozano, F.J. (2017). Connecting Competences and Pedagogical Approaches for Sustainable Development in Higher Education: A Literature Review and Framework Proposal. Sustainability, 9(10), pp.1889–1904,: 
10.3390/su9101889.
MacLeod, M. (2018). What Makes Interdisciplinarity Difficult? Some Consequences of Domain Specifity in Interdisciplinary Practice, Synthese, 195, pp. 697–720.: 
Malmqvist, J., Edström, K., & Rosén, A. (2020a). CDIO Standards 3.0 – Updates to the Core CDIO Standards. Proceedings of the 16th International CDIO Conference, pp. 60-76. Chalmers University of Technology, Gothenburg, Sweden, 2020.: 
Malmqvist, J., Edström, K., Rosén, A., Hugo, R., & Campbell D. (2020b). A First Set of Optional CDIO Standards for Adoption, Proceedings of the 16th International CDIO Conference. Chalmers University of Technology, Gothenburg, Sweden, 2020.: 
Margarov, G., & Konovalova, V. (2019). Interdisciplinary Competencies Needed for Engineers in the Digital Economy; Computer Science and Information Technologies (CSIT), Yerevan, Armenia, pp. 144- 147.: 
Martín Núñez, J.L. & Díaz Lantada, A. (2020). Artificial Intelligence Aided Engineering Education: State of the Art, Potentials and Challenges. International Journal of Engineering Education, 36(6), pp. 1740– 1751.: 
Mathebula, M. (2018). Engineering Education for Sustainable Development - A Capabilities Approach, ISBN 9780367888718, Routledge.: 
McDonough, W., & Braungart M. (2002). Cradle to Cradle: Remaking the Way We Make Things. ISBN: 9780865475878. North Point Press.: 
Mejtoft, T., Berglund, S., Blöcker, C. & Cripps, H. (2020). Sustainable International Experience: A Collaborative Teaching Project. Proceedings of the 16th International CDIO Conference, pp. 554-563, Chalmers University of Technology, Gothenburg, Sweden.: 
Mense, Evan G., et al. (2018). The Development of Global Higher Education in a World of Transformation. Journal of Education and Development 2(3), 47-60.: 
Raworth, K. (2017). Doughnut Economics – Seven Ways to Think Like a 21st Century Economist. Random House Business Books.: 
Mesároš, P., Mandičák, T.,Mesárošová, A., & Behún, M. (2016). Developing Managerial and Digital Competencies through BIM Technologies in Construction Industry. International Conference on Emerging eLearning Technologies and Applications (ICETA), pp. 217-222.: 
Oberländer, M., Beinicke, A., & Bipp, T. (2020). Digital Competencies: A Review of the Literature and Applications in the Workplace. Computers & Education, 146, 103752.: 
Osberg, D. & Biesta, G. (2020). Beyond Curriculum: Groundwork for a Non-Instrumental Theory of Education. Educational Philosophy and Theory.: 
Passow, H.J. & Passow, C.H. (2017). What Competences Should Undergraduate Engineering Programs Emphasize? A Systematic Review. Journal of Engineering Education, 106(3), pp 475-526.: 
Ramadi, E., Ramadi, S., & Nasr, K. (2016). Engineering Graduates’ Skill Sets in the MENA region: A Gap Analysis of Industry Expectations and Satisfaction. European Journal of Engineering Education, 41(1), pp 34-52.: 
Rist, G. (2019). The History of Development - From Western Origins to Global Faith. ISBN: 9781786997562. Zed Books Ltd.: 
Rosén, A., Edström, K., Gumaelius, L., Högfeldt, A.-K, Grøm, A., Lyng, R., Nygaard, M., Munkebo Hussmann, P., Vigild, M., Fruergaard Astrup, T., Karvinen, M., Keskinen, M., Knutson Wedel, M., Lundqvist, U., & Malmqvist, J. (2019). Mapping the CDIO Syllabus to the UNESCO Key Competencies for Sustainability, Proceedings of the 15th International CDIO Conference, Aarhus University, Aarhus, Denmark.: 
Salti, H., Alkhatib, F., Soleimani, S., Abdul-Niby, M., Zabalawi, I., & Kordahji, H. (2019). Engineering education: Institutionalization, internationalisation, and graduate attributes. Proceedings of the 15th International CDIO Conference, pp. 20-30, Aarhus University, Aarhus, Denmark.: 
Sammalisto, K., Ceulemans, K., & Lozano, F.J. (2017). Connecting Competences and Pedagogical Approaches for Sustainable Development in Higher Education: A Literature Review and Framework Proposal. Sustainability, 9(10), pp 1889-1904.: 
Smulders, F., Kamp, A., & Fortin, C. (2018). The CDIO Framework and New Perspectives on Technological Innovation. Proceedings of the 14th International CDIO Conference, pp. 40-52, Kanazawa Institute of Technology, Kanazawa, Japan.: 
Spelt, E.J.H., Luning, P.A., van Boekel, M.A.J.S. & Mulder, M. (2017). A Multidimensional Approach to Examine Student Interdisciplinary Learning in Science and Engineering in Higher education, European Journal of Engineering Education, 42(6), pp. 761-774.: 
Säisä, M., Tiura, K., & Roslöf, J. (2018). Waterfall vs. Agile Project Management Methods in University-Industry Collaboration Projects. Proceedings of the 14th International CDIO Conference, pp. 284-292, Kanazawa Institute of Technology, Kanazawa, Japan.: 
Säisä,M., Seong, T. C., Määttä, S., & Roslöf, J. (2020). International Cooperation between Two Project Learning Environments – a Case Study. Proceedings of the 16th International CDIO Conference, pp. 203-212, Chalmers University of Technology, Gothenburg, Sweden.: 
UN. (2015). Transforming Our World: the 2030 Agenda for Sustainable Development, UN Resolution A/RES/70/1.: 
UN. (2020). Roadmap for Digital Cooperation – Report of the Secretary General. June 2020.: 
UN. (2021). Sharing our Future Together – Listening to People’s Priorities for the Future and Their Ideas for Action. Concluding Report of the UN75 Office, January 2021.: 
UNESCO. (2017). Education for Sustainable Development Goals – Learning Objectives, ISBN 978-92- 3-100209-0.: 
UNESCO. (2021). Engineering for Sustainable Development. ISBN 978-92-3-100437-7.: 
van Puffelen, E., & van Oppen, M. (2020). Supporting Cross-Cultural University Education. Proceedings of the 16th International CDIO Conference, pp. 111-120, Chalmers University of Technology, Gothenburg, Sweden.: 
Wiek, A., Bernstein, M., Foley, R., Cohen, M., Forrest, N., Kuzdas, C., Kay, B., & Withycombe, Keeler, L. (2016). Operationalising Competencies in Higher Education for Sustainable Development. In: Barth, M., Michelsen, G., Rieckmann, M., & Thomas, I. (Eds.) (2016). Handbook of Higher Education for Sustainable Development. Routledge, London. pp. 241-260.: 
Wiek, A., Withycombe, L., & Redman, C.L. (2011). Key Competencies in Sustainability: a Reference Framework for Academic Program Development. Sustainability Science. 6(2), pp 203-218.: 
WWF. (2020). Living Planet Report 2020 - Bending the curve of biodiversity loss.: 
Go to top
randomness